How to Connect ENSON 2500 / 3100 / 3300 to Wi-Fi ?

Enson 2500 / 3100 / 3300 can be used in wi-fi network by attaching a wi-fi dongle. There is a one time effort on configuring the Dongle for the network. From next boot no setting up is required.

• Attach Wi-Fi USB Adapter in USB port ( Supported Models : Netis WF2150/2123/2111, EDiMax EW-7612UAn V2 ).
  
  
• Open the “wi-fi network Connection” from the Right corner of the tray. (You shall find 2 icons over there - the left one for Wired connection and the right one for wi-fi).
  
  
• Go to “Preference” tab and Click “Add”.
  
  
• Browse the “Network name (SSID)”, and Select the available wi-fi network ( eg : Ncs-WIFI ). Give the relevant Network Key ( also referred as security Key / password ).
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
• Select General Tab and give the IP Address (192.168.1.20, Subnet mask - 255.255.255.0, Gateway- 192.168.1.254), and save the configuration. If the network has a DHCP server select “obtain IP address automatically”
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
• Select Preference, choose the Network and “Connect”. If the configuration is correct it should connect to the network.
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
•  Your ENSON device is now fully ready to use in Wi-Fi environment.
  
  
  1. On Re-Boot it shall automatically connect to the available wi-fi network.
     
     
  2. If you have more than one wi-fi zone you can set them up and move them on priority. On every boot it shall check the availability as per sequence and connect to the first available connection.
     
     
  3. If you change the wi-fi adapter it shall automatically configure itself. No setting up is required.